Hit enter to search or ESC to close
10 December 2025
The gabion wire net making machine — yes, that mouthful — is one of those workshop additions that quietly changes how contractors price erosion control and landscaping jobs. I’ve seen units on job sites that shave days off installation because the output is consistent and the twist count is reliable.
The Heavy Type Vertical Gabion Wire Mesh Machine is built for variable widths and mesh sizes. Coating options include heavy galvanizing, zinc, zinc+PVC and galfan for higher corrosion resistance. All units use servo motors (easier debugging), dual rack drive (front & rear both powered), and a PLC that switches between three- and five-twist settings at the touch of a button — handy if you deal with different spec gabions.
Model | Mesh size | Width | Wire dia | Speed |
PLC Heavy Vertical (base) | 50~200 mm | 4300/5600mm | ≈2.0–4.0 mm | 10000 square meters/day |
1) Raw wire (galvanized/galfan/PVC coated) → straightening and feeding → 2) Vertical weaving head (servo-driven) → 3) Twist control (PLC: 3/5 twists) → 4) Cut & stack → 5) Quality testing and packaging. Typical QC: tensile testing per ISO methods, coating adhesion, and salt-spray checks (salt fog: often tested at 240–720h — depends on coating).
Uses: riverbank protection, road slope stabilization, retaining walls, architectural facades, and landscaping. With proper coating (galfan + PVC), service life can exceed 20 years in many environments — but to be honest, coastal sites need extra care.
Vendor | Strengths | Weaknesses |
HT Mesh Machines | Dual rack drive, servo motors, customizable, PLC twist switch | Higher upfront cost vs basic local units |
Local OEM A | Lower price, quick delivery | Limited coatings, manual adjustments |
Imported Brand B | Advanced controls, warranty | Longer lead times, costly spares |
Many customers say the PLC dual-twist feature is a game-changer when switching specs mid-project. Common tests: tensile strength (wire), twist torque, coating thickness, and salt spray (ASTM/EN protocols). Certifications: ISO 9001 and CE are typical — always ask for test reports. Case study (short): a riverside project cut mosaic scheduling by 30% thanks to faster on-site mesh production; long-term monitoring showed minimal corrosion after 5 years.
If you’re comparing machines, pay attention to servo control, twist options, coating compatibility and after-sales spare availability. And yes, price matters — but so does uptime. I guess that’s obvious, but in practice it surprises a few buyers.
For full product details see Heavy Type Vertical Gabion Wire Mesh Machine product page linked above.
1. Product page — HT Mesh Machines: https://www.htmeshmachines.com/product/heavy-type-vertical-gabion-wire-mesh-machine-product.html
2. ISO 9001 — Quality management systems: https://www.iso.org/iso-9001-quality-management.html
3. EN/ASTM galvanizing & testing standards overview — consult local standards body (real-world testing protocols may vary)
